SX-2100 Audio Input Unit

The RM-200S is a remote microphone designed for TOA's Matrix
System. It is equipped with: 13 function switches (which can be used to
select individual zones or zone groups), a covered switch, and
corresponding indicators.

• The RM-210 is an extension unit for increasing the number of function keys of TOA's RM-200M, RM-200XF and RM-200X Remote Microphones.

The SX-2000AO is an audio output of the matrix system. Multiple units
can be decentralized in a whole system. It is equipped with eight audio outputs and two inputs which can be mixed and output. It is also
equipped with eight control inputs, and eight control outputs. The
SX-2000AO receives audio signals from the audio input unit via digital
transmission, but an analog audio input function (1 channel) enables
simultaneous all-zone calls for use in emergency situations. Audio output levels (post-fader levels) are indicated on the level meters provided for each output channel. Any output channel can be monitored using the internal speaker. It is equipped with an emergency audio input and a 24V emergency cutoff input. The SX-2000AO has two power inputs and can support a dual-redundant power supply system.

SX-2000SM can be used in combination with an optional audio input unit, audio output unit, and remote microphone of the SX-2000 Series to make up a complete matrix system and can perform audio signal routing and priority control for the entire system. The SX-2000SM itself is equipped with 8 control inputs, 8 control outputs, failure status outputs, failure data inputs/switches, access indicators mode indicators and failure indicators enabling a wide rage of controls and status monitoring. Each control can be performed by way of a CF card inserted into the SX-2000SM unit. Operations of the entire system can be recorded and their contents stored on a CF card as an operation log.
The SX-2000SM also features two power inputs making possible the creation of a dualredundant power system.

The SX-200RM is a dedicated remote microphone module for the SX-2000 Series audio input unit and can be used to connect two remote microphones. Input sensitivity can be adjusted using the knobs located near the RJ45 connector.