DJ Kilpatrick. Shure Beta 54 Headworn Microphone

Shure Beta 54 Headworn Microphone

Headworn Vocal Microphone Headworn vocal microphone features a smooth, tailored response for a warm, natural sound.

Full Description

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Recommended Uses: Live Vocals

Available Options

BETA 54	Wired Headworn Vocal Microphone
WBH54	Wireless Headworn Vocal Microphone

The Shure BETA 54 is a subminiature, electret condenser headworn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite the small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals.

The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case protects the microphone and its accessories.

A wireless version is available as the WBH54.

Downloads: Beta 54 Spec Sheet; Brochure

FEATURES

Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement

Available with an in-line preamp or with a TA4F connector for wireless applications
WBH54: Choice of black or tan finish to suit your performance environment

SPECS.

Type: Condenser (electret bias)
Frequency Response: 50Hz to 20KHz; View Larger
Polar Pattern: Supercardioid
Output Noise (equivalent dBSPL, A-weighted): 39.0 dB typical; 42.0 dB maximum
Signal-to-Noise Ratio: 55.0 dB at 94 dB SPL
Recommended Minimum Input Impedance: >1 kilohm
Preamp Output Impedance: 136 ohms
Output Level, open circuit, ref. 1v/Pa at 1 kHz: -52.0 +/- 3.0dB 2.51mV

Maximum Sound Pressure Level: 149 dBSPL at 1% THD/1 kilohm load
Dynamic Range: 110 dB (max. SPL with 1k load, minus typical A-wt. noise)
Current Drain: 4.6 mA (preamp and microphone)
Output Polarity: Positive pressure on the diaphragm produces a positive voltage at:; Pin 2 relative to pin 3 at the output connector of the preamp
Power Requirements: Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground)
Net Weight: 135.35 g (4.75 oz.) microphone and in-line preamp
Cable: 1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)

	D.J. Kilpatrick & Co Ltd	12 Dargan Crescent
	sales@djkilpatrick.co.uk	Belfast, Northern Ireland
	tel: 028 9037 0416 fax: 028 9077 9823	BT3 9JP

Shure Beta 54 Headworn Microphone

Full Description

Request More Information

Contact DJ Kilpatrick

D.J. Kilpatrick & Co Ltd